How To Use A Divot Repair Tool - Tips
If we had to describe a divot repair tool, then the best way is to have someone close their eyes and tell them to take two tines of a fork and attach it to a bar and bottle opener on top.
What are they used for?
Well, if you think about it, when you hit a golf ball and it lands on the green, it leaves little dents or impressions — some people call it a depression in the grass because the ball hits the ground so hard.
A divot repair tool is stuck it in the grass around the edge of the depression and pushed towards the depression, so that the grass moves inward. This way, when the ball is put back in place, it will be level on the grass again.
Divot repair tool usage
Here is how to use a divot repair tool when you have found your golf ball on the green after your approach shot:
At the point where the ball impacted the turf is a slight depression. Slip the divot tool at about a 45° angle, under the ball mark, pushing the turf without pulling the roots. Note that healing will begin right away.
Simply push the divot tool down so that it moves normally toward the ball mark spreading the grass over the impression. Then stick the tool in another location around the divot and do the same thing. Repeat the "stick and push in" process in a circular motion around the impression.
Once you're done with this, use your putter or something similar to pat the grass down.
A divot tool will typically have a wedge scoop outline that hinders the lifting movement, minimizing the risk of accidental root separation and guaranteeing a healthy green instead of a dark-colored dead spot from where the golf ball had landed.
Do not lift the grass up after sticking the divot tool into the turf! Instead, push it inward towards the middle of the ball mark.
This video provides a great visual of the process:
Conclusion
This is just another way to keep the green smooth for the other golfers. It is showing respect for the game, course and players.
Everyone tries to do their part. People do not yell or throw litter on the grass, and they are respectful of the other players on the grounds.
They also may regrip their golf clubs to allow for maximum control and to avoid accidentally endangering others with flying golf clubs.
Golf is a game played with respect. Players are even quiet while the other is putting so not to break their concentration. What other sport do you know like this? Amongst other tools and gadgets that you will purchase for your golf bag, make sure to always have a divot repair tool on hand.
The Nine Basic Ball Flight Rules
This infographic illustrates the nine basic ball flight rules. As it says, ball flight is influenced by clubhead path, clubhead angle, loft at impact, and clubhead speed.
How To Hit A 3-Iron — Considerations
There are different clubs required for the game of golf. This ranges from a 6-iron to
a 5-iron to a hybrid and finally, a 3-iron.
These clubs are used based on the player's experience and skill level when playing. Most golfers have a 6-iron in the bag, while many top pros like Tiger Woods, Rory Mcllroy, Justin Thomas, Dustin Johnson and John Rahm, to mention a few, may carry a 3-iron in the bag.
The hybrid is referred to as a utility club and it is used by golfers who are struggling with hitting the 2-iron and the 3-iron.
In-Depth
A 3-iron in golf is what separates the men from the boys. It is widely considered to, along with the 2-iron , be the iron for the serious golfer.
The 3-iron is used by the top pros in golf because it gives greater control and workability. When we discuss irons, no reference is made to the hybrid. They are not the same.
So, you want to know how to hit a 3 iron? First, clear your mind that realize that there is nothing mysterious about it. There are no secrets or puzzles to hitting is compared with hitting another shorter iron.
Follow the simple steps below and you will be swinging the 3-iron like a pro in no time:
Step 1
First, if you are comfortable with the 5-iron and the 4-iron, you can continue with the 3-iron without adjusting your swing position.
There are no secrets to it; just as long as you hit the ball first and make solid contact, it will fly a nice trajectory, albeit a lower one than the shorter irons.
Step 2
Second, as you try to hit the ball, remember to relax your grip and shoulders. This way,
your hit will be consistent and your misses will be better.
It is never good to be tensed up or unfocused when playing.
Step 3
Third, do not change your setup and swing just because you changed your clubs.
If you do anything dramatically different, you probably won't have good results with the 3-iron.
So, do not mess up your game by changing your routine. Focus on your desired trajectory and swing.
Conclusion
To summarize, keep in mind that that the 3-iron is not a mysterious club neither is it hard to play with. All you need to do is consistently practice your swing.
Also, always maintain your speed and efficiency when striking the ball, and in no time, you will start hitting your 3-iron like a pro.
Good luck!
How to Regrip Golf Clubs Without A Vice
Golfing has long been a beloved leisure sport of both past and present. An easy and fun sport, this classic can be enjoyed by many.
Golfing requires the player to have a club, of course. There are many high-quality clubs to choose from on the market today that express both personality and secure aerodynamic effectiveness.
However, even the best quality clubs will experience wear and tear like any other sports accessory.
This includes the grip on a golf club which is most suspectable to damage and deterioration due to it being a frequently used part.
When a player finds that their club needs to be regripped due to age or an accident, there are easy ways to fix the problem. Even though a vice is typically the go-to instrument for regripping the club, there are ways around this if a vice is not available.
Here are ways to regrip golf clubs without a vice:
1. Use a solvent.
If there is no vice available (such as if they're too expensive), solvents come in handy when removing the grip to put in a new one.
The vice is typically used to hold the club in place while the grip is being removed, but the solvent can help loosen the grip without the need for a vice to hold the rod of the club steady.
Here are a few solvents people can find in their own homes:
- Water
- Paint Thinner
- Rubber Cement
- Mineral Spirits
- WD-40
2. Use an air compressor.
If none of the above items are available, stick the needle of the compressor beneath the grip to loosen it up and wiggle it off!
3. Use the kitchen sink as a "clamp".
The kitchen sink can hold the pole of the club steady while the hands work the grip free.
After all of this has been done, the grip is free and ready to be replaced!
As you can see, there are many alternative methods to using a vice to regrip. With a little creativity, you should be able to easily pull it off.
Lower Your Golf Scores In 7 Steps
Everyone wants to lower their golf scores, but few people know how to go about doing it.
This infographic will teach you how to lower your golf scores in seven simple steps.
How To Hit A Draw In Golf - Simple Techniques
Golf is said to be a game of hits and misses. Seasoned golfers most often quote that some of the best hits can turn into a bad miss, whereas some horrible misses can turn
into a good break.
Either way, the twist of the wrist, the swing of the arm, the curve of the draw, and the ability to get precise yardages into greens are what define a golfer’s game to be good or bad.
Golfers also commonly debate on how best to draw a golf ball. A draw shot is technically defined by the curve the ball takes during its trajectory - towards the left if hit by a right-handed golfer and towards the right if hit by a left-handed golfer.
A draw shot is sometimes played to please the crowds and for the sake of showmanship, but most times it is played for function; draws are ideal for pins on the left side of the green and to squeeze out added distance.
For truly gifted golfers, the draw is naturally produced as and when the game demands. For the less gifted ones though, there are a few techniques, which if perfected, can produce the same result.
The following techniques have been known to produce the best result for hitting a draw:
Approach #1
Using a normal stance, a right-handed golfer should strengthen their grip and swing normally, perhaps aiming slightly to the right of the target.
The strong grip will promote a "turning over" of the clubhead at impact and hence a draw.
Approach #2
This time, keeping your stance closed, and with hips and feet as well as the shoulders aligned towards the right of the intended target, point the clubface towards the target, and make a swing according to your alignment.
Final Words
For a visual approach, you can check out this video on how to hit a draw:
Be mindful though, for golfers who naturally hit fades (left to right for a right-handed player), the above techniques might need to be toned up or down a bit to compensate for your natural shot shape.
This means that they will have to go through a few trial and error practice shots to see which one works better, or perhaps a combination of both might be the answer for them.
If you have the main ingredient of what it takes to be a great golfer – i.e., patience – then you have won half your battle with the golf ball anyway.
Good luck on the range and on the course!
The Golf Swing Made Simple
Hey guys,
I wanted to share this. In this video, pros Andy Proudman & Piers Ward simplify the golf swing and show you how to perfect it easily. Enjoy!
